QuoteJuryQuoteJury › Cost guide › Kitchen faucet replacement › Texas
How much does kitchen faucet replacement cost in Texas?
Updated September 2026 · Texas price index 0.95 for plumbing work (national = 1.00)
In Texas, a licensed plumber typically charges $145 to $570 to replace a kitchen faucet (labor plus a mid-range faucet), with most jobs landing near $260. That is about 5% below the national average of $150–$600, based on what plumbers earn in Texas.
AI-powered second opinion using these same Texas figures. No account, no card. Need someone to do the work? Verified pros in Texas took the Fair Price Pledge.
What a Texas quote means
| Quote for this job | What it means |
|---|---|
| Under $87 | Suspiciously low — ask what is excluded, and check licensing and insurance |
| $87 – $627 | Fair price — inside the typical range (up to 10% over the top is still normal) |
| $627 – $998 | Running high — get the quote itemized, and get a second one |
| Over $998 | Ripoff territory — more than 1.75× the high end of the typical range |
Same rules the QuoteJury checker uses on every quote.
What you're paying for
What is usually included: A mid-range single-handle faucet, removal of the old one, new supply lines, and 1–2 hours of labor.
What moves the price:
- Faucet grade: builder-grade units start around $60 while designer pull-downs run $300–$600
- Corroded mounting nuts and seized supply valves that turn a quick swap into a longer job
- Replacing the shutoff valves under the sink at the same time
- Whether the homeowner supplies the faucet
Faucet price tier (pull-down, touchless, and bridge styles cost far more), corroded or seized supply lines/shutoffs that must be replaced, and plumber vs handyman rate.
Kitchen faucet replacement cost across Texas
Typical range by metro and rural area, from BLS wage data for plumbers in each area.
| Area | Typical range | Most jobs |
|---|---|---|
| Abilene, TX | $130 – $520 | $230 |
| Amarillo, TX | $135 – $540 | $240 |
| Austin-Round Rock-San Marcos, TX | $155 – $610 | $280 |
| Beaumont-Port Arthur, TX | $145 – $590 | $260 |
| Brownsville-Harlingen, TX | $115 – $470 | $210 |
| College Station-Bryan, TX | $125 – $510 | $230 |
| Corpus Christi, TX | $140 – $560 | $250 |
| Dallas-Fort Worth-Arlington, TX | $145 – $590 | $260 |
| Eagle Pass, TX | $135 – $530 | $240 |
| El Paso, TX | $130 – $510 | $230 |
| Houston-Pasadena-The Woodlands, TX | $145 – $580 | $260 |
| Killeen-Temple, TX | $140 – $550 | $250 |
| Laredo, TX | $115 – $470 | $210 |
| Longview, TX | $135 – $530 | $240 |
| Lubbock, TX | $125 – $500 | $220 |
| McAllen-Edinburg-Mission, TX | $115 – $460 | $210 |
| Midland, TX | $150 – $590 | $270 |
| Odessa, TX | $145 – $580 | $260 |
| San Angelo, TX | $125 – $500 | $220 |
| San Antonio-New Braunfels, TX | $140 – $560 | $250 |
| Sherman-Denison, TX | $135 – $530 | $240 |
| Texarkana, TX-AR | $125 – $500 | $220 |
| Tyler, TX | $125 – $500 | $220 |
| Victoria, TX | $140 – $560 | $250 |
| Waco, TX | $140 – $550 | $250 |
| Wichita Falls, TX | $125 – $500 | $230 |
| Border Region of Texas nonmetropolitan area | $135 – $540 | $240 |
| Coastal Plains Region of Texas nonmetropolitan area | $140 – $550 | $250 |
| Eastern Region of Texas nonmetropolitan area | $125 – $500 | $230 |
| Hill Country Region of Texas nonmetropolitan area | $125 – $510 | $230 |
| North Region of Texas nonmetropolitan area | $130 – $510 | $230 |
| Northwestern Region of Texas nonmetropolitan area | $130 – $520 | $240 |
Frequently asked
Is $260 a fair price for kitchen faucet replacement in Texas?
Yes. $260 is right around what most homeowners in Texas pay. Anything from $87 to $627 is inside the normal range for a licensed plumber; above $627 it is worth getting a second quote.
Why do quotes for the same job vary so much?
Faucet grade: builder-grade units start around $60 while designer pull-downs run $300–$600. Corroded mounting nuts and seized supply valves that turn a quick swap into a longer job. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.
When should I get a second quote?
Any time a quote lands above $627, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.
Other plumbing jobs in Texas
- Gas water heater replacement (40–50 gallon tank)
- Electric water heater replacement (40–50 gallon tank)
- Gas tankless water heater installation
- Garbage disposal replacement
- Toilet replacement
- Running or leaking toilet repair
- Clogged drain cleaning
- Sewer line camera inspection
- Sewer line hydro jetting
- Sump pump replacement
- Water pressure regulator (PRV) replacement
- Main water shutoff valve replacement
- Leaking pipe repair
- Water heater expansion tank installation
- Plumber service call and hourly rate
Kitchen faucet replacement in other states
United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Sources
- HomeGuide (2025): $250–$600 nationally
- Angi (2026): $162–$364 nationally
- Fixr (2025): $150–$400 nationally
- Bob Vila (2023): $161–$364 nationally
- This Old House (2026): $150–$600 nationally
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area
About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.