QuoteJuryQuoteJury › Cost guide › Leaking pipe repair › Washington
How much does leaking pipe repair cost in Washington?
Updated September 2026 · Washington price index 1.21 for plumbing work (national = 1.00)
In Washington, a licensed plumber typically charges $180 to $660 to repair a single accessible leaking pipe, with most jobs landing near $360. That is about 21% above the national average of $150–$550, based on what plumbers earn in Washington.
AI-powered second opinion using these same Washington figures. No account, no card. Need someone to do the work? Verified pros in Washington took the Fair Price Pledge.
What a Washington quote means
| Quote for this job | What it means |
|---|---|
| Under $108 | Suspiciously low — ask what is excluded, and check licensing and insurance |
| $108 – $726 | Fair price — inside the typical range (up to 10% over the top is still normal) |
| $726 – $1,155 | Running high — get the quote itemized, and get a second one |
| Over $1,155 | Ripoff territory — more than 1.75× the high end of the typical range |
Same rules the QuoteJury checker uses on every quote.
What you're paying for
What is usually included: Locating the leak, cutting out the damaged section, installing a new fitting or section of pipe, and 1–2 hours of labor.
What moves the price:
- Access: an exposed basement pipe versus one inside a wall or slab
- Pipe material and whether the surrounding pipe is deteriorated enough to need a longer section replaced
- Drywall or ceiling repair, which is usually excluded from the plumber's quote
- Emergency call-outs
Access is everything: exposed pipe is a service-call job, while wall, ceiling, or slab leaks add demolition and drywall/concrete repair. Pipe material and emergency timing also move the price.
Leaking pipe repair cost across Washington
Typical range by metro and rural area, from BLS wage data for plumbers in each area.
| Area | Typical range | Most jobs |
|---|---|---|
| Bellingham, WA | $210 – $750 | $410 |
| Bremerton-Silverdale-Port Orchard, WA | $185 – $670 | $370 |
| Kennewick-Richland, WA | $200 – $720 | $400 |
| Longview-Kelso, WA | $175 – $650 | $350 |
| Mount Vernon-Anacortes, WA | $175 – $640 | $350 |
| Olympia-Lacey-Tumwater, WA | $180 – $660 | $360 |
| Seattle-Tacoma-Bellevue, WA | $210 – $760 | $410 |
| Spokane-Spokane Valley, WA | $165 – $600 | $330 |
| Walla Walla, WA | $160 – $590 | $320 |
| Wenatchee-East Wenatchee, WA | $160 – $590 | $320 |
| Yakima, WA | $145 – $530 | $290 |
| Eastern Washington nonmetropolitan area | $150 – $540 | $300 |
| Western Washington nonmetropolitan area | $150 – $550 | $300 |
Frequently asked
Is $360 a fair price for leaking pipe repair in Washington?
Yes. $360 is right around what most homeowners in Washington pay. Anything from $108 to $726 is inside the normal range for a licensed plumber; above $726 it is worth getting a second quote.
Why do quotes for the same job vary so much?
Access: an exposed basement pipe versus one inside a wall or slab. Pipe material and whether the surrounding pipe is deteriorated enough to need a longer section replaced. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.
When should I get a second quote?
Any time a quote lands above $726, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.
Other plumbing jobs in Washington
- Gas water heater replacement (40–50 gallon tank)
- Electric water heater replacement (40–50 gallon tank)
- Gas tankless water heater installation
- Garbage disposal replacement
- Kitchen faucet replacement
- Toilet replacement
- Running or leaking toilet repair
- Clogged drain cleaning
- Sewer line camera inspection
- Sewer line hydro jetting
- Sump pump replacement
- Water pressure regulator (PRV) replacement
- Main water shutoff valve replacement
- Water heater expansion tank installation
- Plumber service call and hourly rate
Leaking pipe repair in other states
United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · West Virginia · Wisconsin · Wyoming
Sources
- HomeGuide (2025): $150–$500 nationally
- Angi (2026): $150–$350 nationally
- Forbes Home (2025): $150–$400 nationally
- Angi (2026): $175–$550 nationally
- Fixr (2025): $150–$350 nationally
- This Old House (2026): $150–$450 nationally
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area
About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.