QuoteJuryQuoteJury › Cost guide › Smart thermostat installation › New Hampshire
How much does smart thermostat installation cost in New Hampshire?
Updated September 2026 · New Hampshire price index 1.14 for HVAC work (national = 1.00)
In New Hampshire, an HVAC company typically charges $90 to $740 to install a smart thermostat (labor plus the device), with most jobs landing near $320. That is about 14% above the national average of $80–$650, based on what HVAC technicians earn in New Hampshire.
AI-powered second opinion using these same New Hampshire figures. No account, no card. Need someone to do the work? Verified pros in New Hampshire took the Fair Price Pledge.
What a New Hampshire quote means
| Quote for this job | What it means |
|---|---|
| Under $54 | Suspiciously low — ask what is excluded, and check licensing and insurance |
| $54 – $814 | Fair price — inside the typical range (up to 10% over the top is still normal) |
| $814 – $1,295 | Running high — get the quote itemized, and get a second one |
| Over $1,295 | Ripoff territory — more than 1.75× the high end of the typical range |
Same rules the QuoteJury checker uses on every quote.
What you're paying for
What is usually included: The thermostat, wiring to the existing terminals, adding a C-wire adapter if needed, configuration and app setup, in about an hour.
What moves the price:
- Device choice: $80–$250 for the thermostat itself
- Missing common (C) wire, which can require an adapter or a new cable run
- Multi-stage, heat-pump or zoned systems that take longer to configure
- Utility rebates that offset part of the cost
Device tier (basic Wi-Fi vs learning model), whether a C-wire or power adapter must be added, and whether an HVAC tech or electrician does it; relocating the thermostat adds $100-$500.
Smart thermostat installation cost across New Hampshire
Typical range by metro and rural area, from BLS wage data for HVAC technicians in each area.
| Area | Typical range | Most jobs |
|---|---|---|
| Manchester-Nashua, NH | $90 – $740 | $320 |
| Central New Hampshire nonmetropolitan area | $80 – $670 | $290 |
| Northern New Hampshire nonmetropolitan area | $90 – $720 | $310 |
| Southwestern New Hampshire nonmetropolitan area | $80 – $660 | $280 |
Frequently asked
Is $320 a fair price for smart thermostat installation in New Hampshire?
Yes. $320 is right around what most homeowners in New Hampshire pay. Anything from $54 to $814 is inside the normal range for an HVAC company; above $814 it is worth getting a second quote.
Why do quotes for the same job vary so much?
Device choice: $80–$250 for the thermostat itself. Missing common (C) wire, which can require an adapter or a new cable run. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.
When should I get a second quote?
Any time a quote lands above $814, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.
Other HVAC jobs in New Hampshire
- AC capacitor replacement
- AC contactor replacement
- Condenser fan motor replacement
- Furnace or air handler blower motor replacement
- AC refrigerant recharge (R-410A)
- Evaporator coil replacement
- AC compressor replacement
- AC condenser (outdoor unit) replacement
- Full central AC system replacement (~3 tons)
- Gas furnace replacement
- Furnace ignitor or flame sensor replacement
- Single-zone ductless mini-split installation
- HVAC service call and diagnostic fee
Smart thermostat installation in other states
United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Sources
- Fixr (2025): $200–$500 nationally
- Angi (2026): $120–$650 nationally
- Forbes Home (2024): $80–$425 nationally
- HomeGuide (2025): $140–$350 nationally
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area
About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.