QuoteJuryQuoteJury › Cost guide › Sump pump replacement › North Carolina
How much does sump pump replacement cost in North Carolina?
Updated September 2026 · North Carolina price index 0.93 for plumbing work (national = 1.00)
In North Carolina, a licensed plumber typically charges $280 to $930 to replace a sump pump, with most jobs landing near $510. That is about 7% below the national average of $300–$1,000, based on what plumbers earn in North Carolina.
AI-powered second opinion using these same North Carolina figures. No account, no card. Need someone to do the work? Verified pros in North Carolina took the Fair Price Pledge.
What a North Carolina quote means
| Quote for this job | What it means |
|---|---|
| Under $168 | Suspiciously low — ask what is excluded, and check licensing and insurance |
| $168 – $1,023 | Fair price — inside the typical range (up to 10% over the top is still normal) |
| $1,023 – $1,628 | Running high — get the quote itemized, and get a second one |
| Over $1,628 | Ripoff territory — more than 1.75× the high end of the typical range |
Same rules the QuoteJury checker uses on every quote.
What you're paying for
What is usually included: A 1/3 to 1/2 HP submersible pump, a new check valve, reconnecting the discharge, testing, and 1–2 hours of labor.
What moves the price:
- Pump horsepower and build (cast iron versus plastic housings)
- Adding a battery backup pump, which can double the total
- Replacing the pit liner, lid or discharge piping
- Emergency replacement during a storm at premium rates
Pedestal vs submersible and horsepower, whether the check valve/discharge piping is replaced, battery backup add-on, and plumber hourly rate.
Sump pump replacement cost across North Carolina
Typical range by metro and rural area, from BLS wage data for plumbers in each area.
| Area | Typical range | Most jobs |
|---|---|---|
| Asheville, NC | $280 – $940 | $520 |
| Burlington, NC | $270 – $910 | $500 |
| Charlotte-Concord-Gastonia, NC-SC | $290 – $950 | $520 |
| Durham-Chapel Hill, NC | $300 – $1,000 | $560 |
| Fayetteville, NC | $260 – $870 | $480 |
| Goldsboro, NC | $250 – $840 | $460 |
| Greensboro-High Point, NC | $280 – $920 | $510 |
| Greenville, NC | $280 – $920 | $510 |
| Hickory-Lenoir-Morganton, NC | $260 – $860 | $480 |
| Jacksonville, NC | $260 – $860 | $470 |
| Pinehurst-Southern Pines, NC | $250 – $830 | $460 |
| Raleigh-Cary, NC | $290 – $980 | $540 |
| Rocky Mount, NC | $270 – $900 | $500 |
| Wilmington, NC | $270 – $910 | $500 |
| Winston-Salem, NC | $260 – $850 | $470 |
| Central North Carolina nonmetropolitan area | $260 – $880 | $480 |
| Eastern North Carolina nonmetropolitan area | $250 – $820 | $450 |
| Western North Carolina nonmetropolitan area | $270 – $890 | $490 |
Frequently asked
Is $510 a fair price for sump pump replacement in North Carolina?
Yes. $510 is right around what most homeowners in North Carolina pay. Anything from $168 to $1,023 is inside the normal range for a licensed plumber; above $1,023 it is worth getting a second quote.
Why do quotes for the same job vary so much?
Pump horsepower and build (cast iron versus plastic housings). Adding a battery backup pump, which can double the total. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.
When should I get a second quote?
Any time a quote lands above $1,023, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.
Other plumbing jobs in North Carolina
- Gas water heater replacement (40–50 gallon tank)
- Electric water heater replacement (40–50 gallon tank)
- Gas tankless water heater installation
- Garbage disposal replacement
- Kitchen faucet replacement
- Toilet replacement
- Running or leaking toilet repair
- Clogged drain cleaning
- Sewer line camera inspection
- Sewer line hydro jetting
- Water pressure regulator (PRV) replacement
- Main water shutoff valve replacement
- Leaking pipe repair
- Water heater expansion tank installation
- Plumber service call and hourly rate
Sump pump replacement in other states
United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Sources
- Angi (2026): $309–$755 nationally
- HomeGuide (2023): $400–$700 nationally
- Fixr (2025): $350–$1,000 nationally
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area
About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.