QuoteJury › Cost guide › 200-amp electrical panel upgrade › Wisconsin

How much does 200-amp electrical panel upgrade cost in Wisconsin?

Updated September 2026 · Wisconsin price index 1.11 for electrical work (national = 1.00)

In Wisconsin, a licensed electrician typically charges $1,450 to $5,000 to replace or upgrade a main electrical panel to 200 amps, with most jobs landing near $2,250. That is about 11% above the national average of $1,300–$4,500, based on what electricians earn in Wisconsin.

Low end
$1,450
Most jobs
$2,250
High end
$5,000
Got a quote for this in Wisconsin? Check if it's fair — free

AI-powered second opinion using these same Wisconsin figures. No account, no card. Need someone to do the work? Verified pros in Wisconsin took the Fair Price Pledge.

What a Wisconsin quote means

Quote for this jobWhat it means
Under $870Suspiciously low — ask what is excluded, and check licensing and insurance
$870 – $5,500Fair price — inside the typical range (up to 10% over the top is still normal)
$5,500 – $8,750Running high — get the quote itemized, and get a second one
Over $8,750Ripoff territory — more than 1.75× the high end of the typical range

Same rules the QuoteJury checker uses on every quote.

What you're paying for

What is usually included: A new 200-amp load center with main breaker, transfer of existing circuits, grounding and bonding brought up to code, permit and inspection, and 4–8 hours of licensed electrician labor.

What moves the price:

Whether the meter/service entrance must also be upgraded, panel relocation, utility disconnect and permit/inspection, and regional labor rates.

200-amp electrical panel upgrade cost across Wisconsin

Typical range by metro and rural area, from BLS wage data for electricians in each area.

AreaTypical rangeMost jobs
Appleton, WI$1,350 – $4,600$2,050
Eau Claire, WI$1,400 – $4,900$2,200
Fond du Lac, WI$1,450 – $5,000$2,250
Green Bay, WI$1,450 – $5,000$2,250
Janesville-Beloit, WI$1,500 – $5,200$2,350
Kenosha, WI$1,400 – $4,900$2,200
La Crosse-Onalaska, WI-MN$1,450 – $5,000$2,250
Madison, WI$1,500 – $5,300$2,350
Milwaukee-Waukesha, WI$1,450 – $5,100$2,300
Oshkosh-Neenah, WI$1,500 – $5,100$2,300
Racine-Mount Pleasant, WI$1,500 – $5,200$2,350
Sheboygan, WI$1,500 – $5,100$2,300
Wausau, WI$1,450 – $5,100$2,250
Northeastern Wisconsin nonmetropolitan area$1,300 – $4,400$2,000
Northwestern Wisconsin nonmetropolitan area$1,250 – $4,400$2,000
South Central Wisconsin nonmetropolitan area$1,300 – $4,550$2,050
Western Wisconsin nonmetropolitan area$1,300 – $4,600$2,050

Frequently asked

Is $2,250 a fair price for 200-amp electrical panel upgrade in Wisconsin?

Yes. $2,250 is right around what most homeowners in Wisconsin pay. Anything from $870 to $5,500 is inside the normal range for a licensed electrician; above $5,500 it is worth getting a second quote.

Why do quotes for the same job vary so much?

Whether the meter base and service entrance cable must be upgraded too (often $500–$1,500 more). Relocating the panel instead of replacing it in place. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.

When should I get a second quote?

Any time a quote lands above $5,500, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.

Other electrical jobs in Wisconsin

200-amp electrical panel upgrade in other states

Sources

About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.