QuoteJuryQuoteJury › Cost guide › Circuit breaker replacement › North Carolina
How much does circuit breaker replacement cost in North Carolina?
Updated September 2026 · North Carolina price index 0.93 for electrical work (national = 1.00)
In North Carolina, a licensed electrician typically charges $45 to $280 to replace a single circuit breaker, with most jobs landing near $140. That is about 7% below the national average of $50–$300, based on what electricians earn in North Carolina.
AI-powered second opinion using these same North Carolina figures. No account, no card. Need someone to do the work? Verified pros in North Carolina took the Fair Price Pledge.
What a North Carolina quote means
| Quote for this job | What it means |
|---|---|
| Under $27 | Suspiciously low — ask what is excluded, and check licensing and insurance |
| $27 – $308 | Fair price — inside the typical range (up to 10% over the top is still normal) |
| $308 – $490 | Running high — get the quote itemized, and get a second one |
| Over $490 | Ripoff territory — more than 1.75× the high end of the typical range |
Same rules the QuoteJury checker uses on every quote.
What you're paying for
What is usually included: A standard 15–30 amp breaker, diagnosis of why it tripped or failed, the swap, and a service call of roughly an hour.
What moves the price:
- Breaker type: standard, GFCI, AFCI or dual-function breakers cost $40–$120 each versus $10–$25 for a plain one
- Obsolete panels (Federal Pacific, Zinsco, Pushmatic) where replacement breakers are scarce or unsafe
- Whether the breaker is the real problem, or a symptom of an overloaded or faulty circuit
- Trip-charge and minimum-visit policies of the company
Breaker type (standard vs. 2-pole, AFCI/GFCI, or main), availability of the panel brand's breaker, and the electrician's service-call minimum.
Circuit breaker replacement cost across North Carolina
Typical range by metro and rural area, from BLS wage data for electricians in each area.
| Area | Typical range | Most jobs |
|---|---|---|
| Asheville, NC | $45 – $270 | $135 |
| Burlington, NC | $45 – $260 | $130 |
| Charlotte-Concord-Gastonia, NC-SC | $50 – $290 | $145 |
| Durham-Chapel Hill, NC | $50 – $300 | $150 |
| Fayetteville, NC | $45 – $280 | $140 |
| Goldsboro, NC | $40 – $250 | $125 |
| Greensboro-High Point, NC | $45 – $280 | $140 |
| Greenville, NC | $45 – $270 | $135 |
| Hickory-Lenoir-Morganton, NC | $45 – $270 | $135 |
| Jacksonville, NC | $40 – $250 | $125 |
| Pinehurst-Southern Pines, NC | $40 – $240 | $120 |
| Raleigh-Cary, NC | $45 – $280 | $140 |
| Rocky Mount, NC | $45 – $280 | $140 |
| Wilmington, NC | $45 – $270 | $135 |
| Winston-Salem, NC | $45 – $270 | $135 |
| Central North Carolina nonmetropolitan area | $45 – $260 | $130 |
| Eastern North Carolina nonmetropolitan area | $45 – $270 | $135 |
| Western North Carolina nonmetropolitan area | $45 – $260 | $130 |
Frequently asked
Is $140 a fair price for circuit breaker replacement in North Carolina?
Yes. $140 is right around what most homeowners in North Carolina pay. Anything from $27 to $308 is inside the normal range for a licensed electrician; above $308 it is worth getting a second quote.
Why do quotes for the same job vary so much?
Breaker type: standard, GFCI, AFCI or dual-function breakers cost $40–$120 each versus $10–$25 for a plain one. Obsolete panels (Federal Pacific, Zinsco, Pushmatic) where replacement breakers are scarce or unsafe. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.
When should I get a second quote?
Any time a quote lands above $308, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.
Other electrical jobs in North Carolina
- 200-amp electrical panel upgrade
- Outlet installation or replacement
- GFCI outlet installation
- Light switch or dimmer installation
- Ceiling fan installation
- New 240-volt dedicated circuit
- Level 2 EV charger installation
- Manual generator transfer switch installation
- Whole-home standby generator installation
- Electrician service call and hourly rate
- Hardwired smoke detector replacement
- Recessed lighting installation
- Light fixture replacement
Circuit breaker replacement in other states
United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Sources
- HomeGuide (2026): $100–$180 nationally
- Angi (2026): $100–$200 nationally
- Forbes Home (2025): $100–$200 nationally
- Forbes Home (2024): $100–$300 nationally
- Thumbtack (2025): $120–$200 nationally
- Fixr (2025): $52–$97 nationally
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area
About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.