QuoteJury › Cost guide › Dryer heating element replacement

How much does dryer heating element replacement cost in 2026?

Updated September 2026 · national figures from 4 published cost guides

Across the U.S., an appliance repair company typically charges $100 to $350 to replace a dryer heating element, with most jobs landing near $240. Prices run higher in high-wage states and metros and lower in rural areas — pick your state below for a local range.

Low end
$100
Most jobs
$240
High end
$350
Got a quote for this? Check if it's fair — free

AI-powered second opinion. No account, no card.

What a quote means (national)

Quote for this jobWhat it means
Under $60Suspiciously low — ask what is excluded, and check licensing and insurance
$60 – $385Fair price — inside the typical range (up to 10% over the top is still normal)
$385 – $613Running high — get the quote itemized, and get a second one
Over $613Ripoff territory — more than 1.75× the high end of the typical range

Same rules the QuoteJury checker uses on every quote.

What you're paying for

What is usually included: Diagnosis, the heating element (and usually the thermal fuse or high-limit thermostat), installation and testing, in about an hour.

What moves the price:

The part is cheap ($20-$100 for most brands); price is mostly the service call plus 1-2 hours labor, with premium brands (Samsung, LG) and assembly-kit elements costing more.

Dryer heating element replacement cost by state

Typical range for each state, adjusted with BLS wage data for appliance repair technicians. Index 1.00 = national average.

StateTypical rangeMost jobsIndex
Alabama$95 – $340$2300.96
Alaska$120 – $420$2901.19
Arizona$95 – $340$2300.96
Arkansas$85 – $290$2000.83
California$110 – $390$2701.12
Colorado$105 – $370$2501.06
Connecticut$115 – $410$2801.17
Delaware$105 – $360$2501.03
District of Columbia$140 – $490$3401.41
Florida$105 – $370$2501.05
Georgia$95 – $340$2300.97
Hawaii$110 – $390$2701.10
Idaho$95 – $320$2200.93
Illinois$105 – $370$2601.07
Indiana$95 – $330$2300.94
Iowa$90 – $320$2200.91
Kansas$85 – $300$2000.85
Kentucky$95 – $340$2300.97
Louisiana$95 – $330$2300.95
Maine$95 – $330$2300.95
Maryland$110 – $390$2701.12
Massachusetts$125 – $450$3101.27
Michigan$100 – $350$2401.00
Minnesota$115 – $400$2701.14
Mississippi$80 – $270$1900.78
Missouri$95 – $340$2300.96
Montana$95 – $330$2300.95
Nebraska$95 – $330$2200.93
Nevada$95 – $330$2300.95
New Hampshire$105 – $370$2501.05
New Jersey$110 – $380$2601.08
New Mexico$85 – $290$2000.83
New York$120 – $420$2901.20
North Carolina$95 – $330$2300.94
North Dakota$100 – $340$2400.98
Ohio$95 – $330$2300.95
Oklahoma$85 – $300$2100.86
Oregon$105 – $360$2501.03
Pennsylvania$100 – $350$2401.00
Rhode Island$100 – $360$2401.02
South Carolina$95 – $330$2300.94
South Dakota$95 – $330$2300.94
Tennessee$95 – $340$2300.97
Texas$95 – $340$2300.96
Utah$100 – $340$2300.98
Vermont$110 – $390$2701.11
Virginia$110 – $390$2701.12
Washington$115 – $400$2701.14
West Virginia$80 – $280$1950.81
Wisconsin$100 – $350$2401.01
Wyoming$90 – $320$2200.92

Frequently asked

Is $240 a fair price for dryer heating element replacement in the U.S.?

Yes. $240 is right around what most homeowners in the U.S. pay. Anything from $60 to $385 is inside the normal range for an appliance repair company; above $385 it is worth getting a second quote.

Why do quotes for the same job vary so much?

Whether the thermal fuse, thermostat or cycling thermostat also failed. Brand and model of the element. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.

When should I get a second quote?

Any time a quote lands above $385, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.

Other appliance repair jobs

Sources

About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.