QuoteJury › Cost guide › Single-zone ductless mini-split installation › Texas

How much does single-zone ductless mini-split installation cost in Texas?

Updated September 2026 · Texas price index 0.96 for HVAC work (national = 1.00)

In Texas, an HVAC company typically charges $1,900 to $8,400 to install a single-zone ductless mini-split, with most jobs landing near $4,100. That is about 4% below the national average of $2,000–$8,800, based on what HVAC technicians earn in Texas.

Low end

$1,900

Most jobs

$4,100

High end

$8,400

Got a quote for this in Texas? Check if it's fair — free

AI-powered second opinion using these same Texas figures. No account, no card. Need someone to do the work? Verified pros in Texas took the Fair Price Pledge.

What a Texas quote means

Quote for this job	What it means
Under $1,140	Suspiciously low — ask what is excluded, and check licensing and insurance
$1,140 – $9,240	Fair price — inside the typical range (up to 10% over the top is still normal)
$9,240 – $14,700	Running high — get the quote itemized, and get a second one
Over $14,700	Ripoff territory — more than 1.75× the high end of the typical range

Same rules the QuoteJury checker uses on every quote.

What you're paying for

What is usually included: The outdoor unit and one indoor head, line set and drain, a dedicated electrical circuit, mounting, vacuum and charge, permit and startup, in 4–8 hours.

What moves the price:

System size (9,000–24,000 BTU) and efficiency tier
Line set length and whether the electrical circuit already exists
Brand: premium Japanese brands versus value brands
Wall versus ceiling cassette indoor units
Permit fees

BTU size and brand tier (Mitsubishi/Daikin vs budget), line-set length and wall/ceiling mount type, need for a dedicated electrical circuit, and permits.

Single-zone ductless mini-split installation cost across Texas

Typical range by metro and rural area, from BLS wage data for HVAC technicians in each area.

Area	Typical range	Most jobs
Abilene, TX	$1,800 – $8,000	$3,850
Amarillo, TX	$1,750 – $7,600	$3,700
Austin-Round Rock-San Marcos, TX	$2,050 – $9,000	$4,350
Beaumont-Port Arthur, TX	$1,900 – $8,400	$4,050
Brownsville-Harlingen, TX	$1,600 – $7,100	$3,450
College Station-Bryan, TX	$1,700 – $7,500	$3,650
Corpus Christi, TX	$1,800 – $7,800	$3,800
Dallas-Fort Worth-Arlington, TX	$2,000 – $8,700	$4,200
Eagle Pass, TX	$1,800 – $7,900	$3,800
El Paso, TX	$1,650 – $7,200	$3,500
Houston-Pasadena-The Woodlands, TX	$1,950 – $8,600	$4,150
Killeen-Temple, TX	$1,750 – $7,700	$3,700
Laredo, TX	$1,650 – $7,200	$3,500
Longview, TX	$1,850 – $8,100	$3,900
Lubbock, TX	$1,700 – $7,500	$3,650
McAllen-Edinburg-Mission, TX	$1,600 – $7,000	$3,400
Midland, TX	$2,000 – $8,700	$4,200
Odessa, TX	$1,950 – $8,500	$4,100
San Angelo, TX	$1,700 – $7,600	$3,650
San Antonio-New Braunfels, TX	$1,900 – $8,400	$4,100
Sherman-Denison, TX	$1,850 – $8,200	$3,950
Texarkana, TX-AR	$1,700 – $7,400	$3,600
Tyler, TX	$1,700 – $7,500	$3,650
Victoria, TX	$1,700 – $7,500	$3,600
Waco, TX	$1,850 – $8,200	$3,950
Wichita Falls, TX	$1,700 – $7,500	$3,650
Border Region of Texas nonmetropolitan area	$1,750 – $7,700	$3,750
Coastal Plains Region of Texas nonmetropolitan area	$1,850 – $8,100	$3,900
Eastern Region of Texas nonmetropolitan area	$1,700 – $7,600	$3,650
Hill Country Region of Texas nonmetropolitan area	$1,700 – $7,500	$3,650
North Region of Texas nonmetropolitan area	$1,700 – $7,500	$3,650
Northwestern Region of Texas nonmetropolitan area	$1,800 – $7,900	$3,800

Frequently asked

Is $4,100 a fair price for single-zone ductless mini-split installation in Texas?

Yes. $4,100 is right around what most homeowners in Texas pay. Anything from $1,140 to $9,240 is inside the normal range for an HVAC company; above $9,240 it is worth getting a second quote.

Why do quotes for the same job vary so much?

System size (9,000–24,000 BTU) and efficiency tier. Line set length and whether the electrical circuit already exists. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.

When should I get a second quote?

Any time a quote lands above $9,240, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.

Other HVAC jobs in Texas

Single-zone ductless mini-split installation in other states

United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming

Sources

HomeGuide (2025): $2,500–$6,000 nationally
Angi (2026): $2,000–$8,800 nationally
Bob Vila (2024): $2,000–$8,800 nationally
U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area

About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.