QuoteJury › Cost guide › Furnace or air handler blower motor replacement › Texas

How much does furnace or air handler blower motor replacement cost in Texas?

Updated September 2026 · Texas price index 0.96 for HVAC work (national = 1.00)

In Texas, an HVAC company typically charges $240 to $2,300 to replace a furnace or air handler blower motor, with most jobs landing near $570. That is about 4% below the national average of $250–$2,400, based on what HVAC technicians earn in Texas.

Low end

$240

Most jobs

$570

High end

$2,300

Got a quote for this in Texas? Check if it's fair — free

AI-powered second opinion using these same Texas figures. No account, no card. Need someone to do the work? Verified pros in Texas took the Fair Price Pledge.

What a Texas quote means

Quote for this job	What it means
Under $144	Suspiciously low — ask what is excluded, and check licensing and insurance
$144 – $2,530	Fair price — inside the typical range (up to 10% over the top is still normal)
$2,530 – $4,025	Running high — get the quote itemized, and get a second one
Over $4,025	Ripoff territory — more than 1.75× the high end of the typical range

Same rules the QuoteJury checker uses on every quote.

What you're paying for

What is usually included: Diagnosis, the replacement motor (and capacitor or control module as needed), installation and testing, in 2–3 hours.

What moves the price:

Motor type: a basic PSC motor costs a fraction of a variable-speed ECM motor, which can run $600–$1,500 in parts alone
Parts warranty on the system, which can leave only labor to pay
Access to the blower compartment
Whether the control board also failed

PSC vs ECM/variable-speed motor is the biggest swing (ECM modules can be 2-3x), plus horsepower, OEM vs universal, and parts-warranty status.

Furnace or air handler blower motor replacement cost across Texas

Typical range by metro and rural area, from BLS wage data for HVAC technicians in each area.

Area	Typical range	Most jobs
Abilene, TX	$230 – $2,200	$540
Amarillo, TX	$220 – $2,100	$510
Austin-Round Rock-San Marcos, TX	$260 – $2,450	$610
Beaumont-Port Arthur, TX	$240 – $2,300	$560
Brownsville-Harlingen, TX	$200 – $1,950	$480
College Station-Bryan, TX	$210 – $2,050	$510
Corpus Christi, TX	$220 – $2,150	$520
Dallas-Fort Worth-Arlington, TX	$250 – $2,350	$580
Eagle Pass, TX	$220 – $2,150	$530
El Paso, TX	$210 – $1,950	$480
Houston-Pasadena-The Woodlands, TX	$240 – $2,350	$570
Killeen-Temple, TX	$220 – $2,100	$520
Laredo, TX	$200 – $1,950	$480
Longview, TX	$230 – $2,200	$540
Lubbock, TX	$210 – $2,050	$510
McAllen-Edinburg-Mission, TX	$200 – $1,900	$470
Midland, TX	$250 – $2,350	$580
Odessa, TX	$240 – $2,300	$570
San Angelo, TX	$210 – $2,050	$510
San Antonio-New Braunfels, TX	$240 – $2,300	$570
Sherman-Denison, TX	$230 – $2,200	$550
Texarkana, TX-AR	$210 – $2,000	$500
Tyler, TX	$210 – $2,050	$500
Victoria, TX	$210 – $2,050	$500
Waco, TX	$230 – $2,250	$550
Wichita Falls, TX	$210 – $2,050	$510
Border Region of Texas nonmetropolitan area	$220 – $2,100	$520
Coastal Plains Region of Texas nonmetropolitan area	$230 – $2,200	$540
Eastern Region of Texas nonmetropolitan area	$210 – $2,050	$510
Hill Country Region of Texas nonmetropolitan area	$210 – $2,050	$510
North Region of Texas nonmetropolitan area	$210 – $2,050	$510
Northwestern Region of Texas nonmetropolitan area	$220 – $2,150	$530

Frequently asked

Is $570 a fair price for furnace or air handler blower motor replacement in Texas?

Yes. $570 is right around what most homeowners in Texas pay. Anything from $144 to $2,530 is inside the normal range for an HVAC company; above $2,530 it is worth getting a second quote.

Why do quotes for the same job vary so much?

Motor type: a basic PSC motor costs a fraction of a variable-speed ECM motor, which can run $600–$1,500 in parts alone. Parts warranty on the system, which can leave only labor to pay. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.

When should I get a second quote?

Any time a quote lands above $2,530, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.

Other HVAC jobs in Texas

Furnace or air handler blower motor replacement in other states

United States (national) · Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · District of Columbia · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming

Sources

Angi (2026): $350–$2,400 nationally
Bob Vila (2022): $250–$900 nationally
HomeGuide (2025): $300–$900 nationally
Fixr (2026): $300–$2,000 nationally
U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area

About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.