QuoteJury › Cost guide › Furnace or air handler blower motor replacement

How much does furnace or air handler blower motor replacement cost in 2026?

Updated September 2026 · national figures from 4 published cost guides

Across the U.S., an HVAC company typically charges $250 to $2,400 to replace a furnace or air handler blower motor, with most jobs landing near $590. Prices run higher in high-wage states and metros and lower in rural areas — pick your state below for a local range.

Low end

$250

Most jobs

$590

High end

$2,400

Got a quote for this? Check if it's fair — free

AI-powered second opinion. No account, no card.

What a quote means (national)

Quote for this job	What it means
Under $150	Suspiciously low — ask what is excluded, and check licensing and insurance
$150 – $2,640	Fair price — inside the typical range (up to 10% over the top is still normal)
$2,640 – $4,200	Running high — get the quote itemized, and get a second one
Over $4,200	Ripoff territory — more than 1.75× the high end of the typical range

Same rules the QuoteJury checker uses on every quote.

What you're paying for

What is usually included: Diagnosis, the replacement motor (and capacitor or control module as needed), installation and testing, in 2–3 hours.

What moves the price:

Motor type: a basic PSC motor costs a fraction of a variable-speed ECM motor, which can run $600–$1,500 in parts alone
Parts warranty on the system, which can leave only labor to pay
Access to the blower compartment
Whether the control board also failed

PSC vs ECM/variable-speed motor is the biggest swing (ECM modules can be 2-3x), plus horsepower, OEM vs universal, and parts-warranty status.

Furnace or air handler blower motor replacement cost by state

Typical range for each state, adjusted with BLS wage data for HVAC technicians. Index 1.00 = national average.

State	Typical range	Most jobs	Index
Alabama	$220 – $2,050	$510	0.86
Alaska	$300 – $2,850	$710	1.20
Arizona	$250 – $2,350	$580	0.98
Arkansas	$210 – $2,050	$500	0.85
California	$290 – $2,750	$670	1.14
Colorado	$270 – $2,600	$640	1.08
Connecticut	$300 – $2,850	$700	1.18
Delaware	$250 – $2,450	$600	1.02
District of Columbia	$350 – $3,400	$830	1.41
Florida	$240 – $2,250	$560	0.95
Georgia	$240 – $2,250	$560	0.94
Hawaii	$270 – $2,550	$630	1.07
Idaho	$240 – $2,250	$560	0.94
Illinois	$290 – $2,750	$680	1.15
Indiana	$240 – $2,350	$580	0.98
Iowa	$250 – $2,350	$580	0.98
Kansas	$250 – $2,350	$580	0.98
Kentucky	$240 – $2,300	$570	0.96
Louisiana	$240 – $2,300	$560	0.95
Maine	$260 – $2,450	$600	1.02
Maryland	$280 – $2,700	$660	1.12
Massachusetts	$300 – $2,900	$710	1.21
Michigan	$250 – $2,400	$580	0.99
Minnesota	$290 – $2,800	$690	1.17
Mississippi	$210 – $2,000	$490	0.84
Missouri	$240 – $2,350	$580	0.97
Montana	$250 – $2,350	$580	0.99
Nebraska	$250 – $2,350	$580	0.98
Nevada	$240 – $2,350	$580	0.98
New Hampshire	$290 – $2,750	$670	1.14
New Jersey	$290 – $2,800	$680	1.16
New Mexico	$220 – $2,100	$520	0.89
New York	$290 – $2,800	$690	1.16
North Carolina	$240 – $2,300	$560	0.95
North Dakota	$280 – $2,700	$670	1.13
Ohio	$250 – $2,400	$590	1.01
Oklahoma	$240 – $2,250	$560	0.94
Oregon	$260 – $2,500	$620	1.05
Pennsylvania	$250 – $2,400	$590	1.01
Rhode Island	$270 – $2,600	$640	1.09
South Carolina	$230 – $2,250	$550	0.94
South Dakota	$250 – $2,350	$580	0.98
Tennessee	$230 – $2,250	$550	0.93
Texas	$240 – $2,300	$570	0.96
Utah	$240 – $2,350	$580	0.97
Vermont	$260 – $2,500	$610	1.04
Virginia	$250 – $2,450	$600	1.01
Washington	$300 – $2,850	$700	1.19
West Virginia	$220 – $2,050	$510	0.86
Wisconsin	$250 – $2,400	$590	1.00
Wyoming	$240 – $2,250	$550	0.94

Frequently asked

Is $590 a fair price for furnace or air handler blower motor replacement in the U.S.?

Yes. $590 is right around what most homeowners in the U.S. pay. Anything from $150 to $2,640 is inside the normal range for an HVAC company; above $2,640 it is worth getting a second quote.

Why do quotes for the same job vary so much?

Motor type: a basic PSC motor costs a fraction of a variable-speed ECM motor, which can run $600–$1,500 in parts alone. Parts warranty on the system, which can leave only labor to pay. Company overhead matters too: a large company with trucks, dispatchers and a warranty department charges more than a one-person shop, and both can be honest prices.

When should I get a second quote?

Any time a quote lands above $2,640, or when the contractor cannot break it into parts, labor and fees. Ask for the itemized version, ask what would change the price, and confirm licensing and insurance. You can also paste the quote into the free QuoteJury checker for an instant second opinion.

Other HVAC jobs

Sources

Angi (2026): $350–$2,400 nationally
Bob Vila (2022): $250–$900 nationally
HomeGuide (2025): $300–$900 nationally
Fixr (2026): $300–$2,000 nationally
U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 — median hourly wages by state and metro area

About these numbers. Ranges are typical market rates for a licensed, insured contractor, blended from published U.S. cost guides and adjusted with U.S. Bureau of Labor Statistics wage data (OEWS, May 2025) for each state and metro area. They are estimates, not a bid, appraisal or inspection. Real prices move with parts, access, permits and code requirements. The quote checker is AI-powered and labeled as such.